Sikafloor CureHard-24 10 Kg

Sikafloor CureHard-24 is a high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.

USES

Sikafloor CureHard-24 may only be used by experienced professionals.

Horizontal old or new concrete surfaces, where a hard surface with light to moderate abrasion resistance is required e.g. warehouses, industrial plants, stores, shopping malls, parking structures, service stations, hangars etc.

On concrete slabs where no specific curing efficiency or standards are required

Suitable for interior or exterior applications

Dust-proofing of prefabricated concrete elements

Suitable for protection against ingress (Principle 1, method 1.2 of EN 1504-9)

Suitable for physical resistance (Principle 5, method 5.2 of EN 1504-9)

CHARACTERISTICS / ADVANTAGES

• Ready to use
• Easy to apply
• Improved chemical and abrasion resistance compared to untreated concrete
• Reduced dusting of concrete floors
• Slightly reduces loss of water of new concrete while setting
• Improves Cleanability
• Non-yellowing
• Good penetration
• Solvent free
• Colourless and odourless

APPROVALS / STANDARDS

Impregnation for surface protection of concrete according to EN 1504-2:2004, ingress protection and physical resistance, Declaration of Performance 02 08 03 04 004 0 000001 1180, certified by notified factory production control certification body 1020, certificate of conformity of the factory production control 020025682, and provided with the CE marking.

PRODUCT INFORMATION

Chemical Base Sodium silicate

Packaging 10 kg x 1 container

Appearance / Colour Clear liquid

Shelf Life 12 months from date of production

Storage Conditions The product must be stored properly in original, unopened and undamaged sealed packaging, in dry conditions at temperatures between +5 C and +30 C. Protect from frost.

Density ~1.15 kg/l (at +27 C)